TapAction Slot Requires Text Slot to be Present

One of the Newton 2.x OS Q&As
Copyright © 1997 Newton, Inc. All Rights Reserved. Newton, Newton Technology, Newton Works, the Newton, Inc. logo, the Newton Technology logo, the Light Bulb logo and MessagePad are trademarks of Newton, Inc. and may be registered in the U.S.A. and other countries. Windows is a registered trademark of Microsoft Corp. All other trademarks and company names are the intellectual property of their respective owners.


For the most recent version of the Q&As on the World Wide Web, check the URL: http://www.newton-inc.com/dev/techinfo/qa/qa.htm
If you've copied this file locally,click here to go to the main Newton Q&A page.
This document was exported on 7/23/97.

TapAction Slot Requires Text Slot to be Present (1/15/97)

Q: I have an autopart that I want to display an About slip when tapped. I added a tapAction slot but it does not work. What is missing?

A: The system will ignore the tapAction slot if it does not find a 'text slot in the partFrame as well. The 'text slot contains the name that will be displayed in the Extras drawer.

The following lines will correctly add a tapAction to a your part frame (in other words, your autopart):

    DefineGlobalConstant('kTapActionFn,func()begin    // your code goes here! end);// part MUST have a text slot for tapAction to be used// text slot is the name seen by the user in ExtrasSetPartFrameSlot('text, kAppName) ;SetPartFrameSlot('tapAction, kTapActionFn) ;